[ Resources] Resources for Among Us
Introduction:
I have seen a LOT of Help posts about how to make Among Us in Gimkit Creative, because many of the posters never knew about the other posts. if you don’t believe me, just go here:
https://forum.creative.gimkit.com/search?q=%23help%20among%20us%20help
This resource page will provide a list of guides to help you build your Among Us map.
Resources:
make a property global “Dead Players” Text property and Broadcast on changed make it “Deadpeople” make a popup with the Header Vitals and now go to block code channel on “Deadpeople”
now the block code sets header to vitals and the content will change to Deadpeople
The vitals Main
btw you will need To do the killing system
How to make killing for Among Us (Difficulty: ) - Community Made Guides - Gimkit Creative
Now after doing that modify the tag zone On player tagged Broadca…
If Gimkit sees this, I reccomend making one last game mode before the school year ends!
Hey there! My name is Tom. I created a mini guide for everyone on how to make an emergency meeting in Among Us
I’ve come across this question a few times now. Some are about how to MAKE the whole game. Some questions are just about how to make an emergency meeting, make tasks, make a venting system, and a LOT more. So I decided to make a tutorial on all three questions that I just mentioned above. I hope th…
I realized that there isn’t already a guide for this, so here it is!
First we’re going to make it so when you complete a task it transmits on a channel. Now, this depends on what you have set up for tasks, if it’s just a button, or the player gets teleported to the task in which they have to do. If it is a button, make it so it sends on a channel called task done.
[image]
If the task is set up where the player is teleported to it, make the teleporter that the player is teleported to when don…
Level:
Required Items:
2 zones
Sentry
2 teleporters
Laser beam
First put a teleporter down in your room (medbay, admin, etc). Set the teleporter up like this
[IMG_0031]
Now make a room outside of your spaceship or place. Make it big enough to hold as many vents as you need. Now place a teleporter in this vent room. Set it up like this
[IMG_0033]
Now so if the imposter goes into the vent/teleporter he/she should end up in the vent room.
Now pla…
These steps also work for other situations where everyone but one player is on a team, for example a boss battle. The boss would be the imposter, and the cremates would be everyone else.
For the purposes of this tutorial, team 1 is the cremates, and team 2 is the imposter. For this to work, you need to go to Settings → Map Options → Teams, and set the team mode to Cooperative.
Now, place down a lifecycle device. This will trigger when the game starts. Then, place down a relay and wire the life…
Go to Map Options, and click Score. Make the Score Type “Amount Of Specific Item”. (Make the item something you don’t get in-game) Put whatever you want for the Score Name. Make the Score Group “Player”. If you’re making among us, On the “Show Leaderboard On Game End”, Put No. On the “Show Placement”, Also Put No.
(Credits to @Im_Pretty_Cool for the idea)
Hello! There is really good guide about venting for Among Us and I would like to add on to it by letting you know how to let imposters hide in vents and travel throughout them with buttons, just like in actual Among Us.
Setting Up:
First, follow the instructions in this guide:
However, make it so the teleporter teleports you to another teleporter in a room outside the ship nearby the vent. Make sure there is a camera device in each room with a vent …
HOW TO MAKE KILLING
Requirements:
Tag zone x1
Game overlay x1
Trigger x2
Team switcher x1
If you’ve already set up your teams, you should have a relay that is used with a team switcher to make a random player the impostor. Place down a game overlay, and wire the relay to the overlay, and set the wire to Relay trigger > show overlay.
Click on the overlay, and set these settings in “featured:”
[Screenshot 2023-06-09 7.24.57 AM]
Click on “scope” and set “visibility scope” to “player.”
Plac…
In-game chat system: A guide.
In this guide, I will teach you how to make your very own chat system. A few disclaimers to start:
This will take up 10% of memory if you build it exactly as I have; if you use more or fewer options it will vary.
It can only use predetermined messages, and it will show messages to everybody.
Now for the guide.
[Full Chat System]
Here is what seems like a mess of devices and wires, but I will explain it all.
Next to the text that says Starting Overlay: is a gam…
Have you ever tried to make Among Us? If you have, have you used popups to tell the player that they are either Crewmate or Imposter? Have you had an error when you made both the popups and the team choosers at the same time? I have. It shows you the popup before changing teams. If you have this error, I will explain the way of solving this below:
First, do all your team chooser stuff. Mine contains a Lifecycle, a Relay, and a Team Switcher. My Popup section contains two Relays and two Popups. …
Massive credit to @CringeKarlScott for making the original guide. You can find it here!
This current guide is an expansion on @CringeKarlScott 's guide, and allows the killing button to also leave a dead body behind. This is how to do it.
Materials Needed:
Inventory Item Manager x1
Tag Zone x1
Team Switcher x1
Overlay x1
Wire Repeater x3
Item Granter x1
Instructions
Set up your imposter team switcher, place down your overlay, and make it so that the overlay is only visible to team i…
Tasks:
If you want to make Among Us in Gimkit, a very frequent task is wires. If you find a better way to make it, please tell me so that I can improve my post. To make it, you will need:
2 teleporters (Devices),
8 zones (Devices),
4 blackboard legs (Props),
5 counters (Devices),
1 button per task time (Devices), and
1 barrier (Devices).
First, you need to make a room for the task. I make mine from speckled grey and colored plastic floors for the connecting points.
[Screenshot 2023-06-01 08572…
If you want a simple, easy, and understandable guide on how to make the clean vent or clean filter task for your among us map, this is the guide for you. Today I will be showing you a quick and simple way to make this kind of task.
What you will need
1 counter
3 zones
3 “junk props” Ex. Leaves, Trash, Junk pile.
1 teleporter
1 popup
Any number of terrain
Overview
For this task you will have to run and touch the “junk props” to make them disappear. We will use zones around the junk props…
The only reason this is complicated(ish) is because of the wires. Of course, you can use channels. I will include that as a bonus.
Step One: The Rooms and the Teleporters Create the room, of course(The Weapons Room AND The Task Room)! Just put something like a button or an item shop in the middle of your weapons room. Make it so that once you interact with it it will teleport you to this Task Room. Place down a counter, and set the target value to, like ten or twenty(ten is easier to assemble). …
Okay, this will just be a NO-Teleporter task. It will be pretty easy to make, since all you have to do is transport the “fuel”. Note: This is for ONE engine, so you probably will need to copy it for the second engine.
Devices: Item Granter 2x
Button 2x
Wire Repeater 2x(For only a one-time task)
Picking up the Fuel I am using a Water Dispenser(Props) as my Fuel Giver, and a Bucket as my Fuel Dropper. For the “Fuel”, I am using Water. Now, make your buttons not visible in game. Activate it when r…
Hey guys! I know, I’ve been making TONS of Among Us guides these days. But what about another? Today I will be showing you how to make the Swipe Card Task, and I am sure you all know about this one.
Devices you will need:
Counter 1x
Repeater 1x
Item Granter 2x
Button 3x
Wire Repeater 3x
Teleporter 5x
Barrier 1x
Popup 1x
Step One: Making the Teleporter Place down your first button. This is the one that will be at the Admin Room. These are your settings:
<a class="lightbox"…
Voting:
I am aware that @Tom has already created this guide, and credits to him for doing the first one:
This is a great guide, however it tells everyone to go to the table for the emergency meeting, while the guide I’m making will teleport everyone to the table. Ok, lets get started!
This first part is similar to what @Tom did, but with a few added things.
Place down a button and make it transmit on the channel “emergency meeting”.
Next, make it Active on Game Start, When button pressed, transmit …
Hey, this is my first somewhat big project on how I made a voting device because I have seen many people wanting to make this for their Among Us game.
SPECTATOR: PLAYER WILL BE PUT ON SPECTATOR WHEN PLAYER IS KNOCKED OUT Place down a “Life Cycle” device and choose “Player Knocked Out”, “When Event Occurs, transmit on” **name that “**PlayerIsSpectator”. Place a team switcher down, “Switch Strategy” select specific team and choose “Spectator” team. “Switch to configured team when receiving on” n…
TEAM SETUP
Open Settings > Map Options > Teams. Set the Team mode to “Specific Team Amount”, Set Number Of Teams to the amount of players you expect to j oin the game. Set Team Placement to “Split Evenly”.
[image]
Add a Relay, set the Relay Audience to “Random Player On Specific Team”. Set Team to whatever team you want, this will be your impostor team. Wire a Lifecycle with the relay.
NOTE: The team has to be between the amount of players in the game or it WON’T work.
Next, add an Item …
There have been many guides on how to make voting system for Among Us. However, they all have one fatal flaw: they only hold a certain amount of players. This guide will change that.
This approach uses a DEFICIT of keycards or any other item to track the amount of votes. Also, don’t use the Green Keycard in your map.
Some pros of this approach: Hosts any number of players, simple to build, and small amount of memory.
Some cons: Heavy use of scope!, voting is a slow process, and ties result in…
[image]
The age old question that has been on the forums since the beginning of time itself: How do you make voting in amongus! There have been multiple solutions before, involving teaming, buttons, and other things. But today, I am going to show you how to make a voting system with popups that display the name of the person you are voting for! This guide is all over the place though, and needs major editing and refining. (not the best at making big guides like this) I will be trying my best t…
This guide was originally for voting, so it also has a vote counting system in it.
This guide uses Iterative Player ID’s to iterate through the entire server for the player. This uses some concepts from my previous guide on this as well. This method, however, lets you have a faster voting experience, and will help you have a better voting experience in total. I also revised it to allow for ties. I suggest that you don’t try to do this all in one sitting, but rather over a few days.
Note: I fix…
Art:
So this map was made on May 23, 2023, and has blown the minds of everyone that has saw it. I originaly made this map for a friend on Fandom and later it became my greatest map ever made. It took me about 8 days to make, and in my defense Gimkit Creative just came out so we were all new to this.It is based off of a blurry photo of the real Skeld map. And it is impossibly accurate. Recently I was asked by @lcornwell3923 to design the Skeld map, and thats when I realized, I had aready made the map,…
So yes, yet again I am coming out with an Among Us guide. This time it was a suggestion from @margimkitcreator . This map is called Mira, it is one of the 3 Among Us maps, and it will be the second Among Us guide that I will create. So this map is currently three-quarters of the way done and will be finished very soon. But because i am only a map designer, I will only post the photos of the map. @getrithekd is making the code, so if you want to know the code, ask him to make a guide. Also this is…
So I was reading through @Anythinger ’s resources for among us and I realized: There was no guide there for how to make the lobby. So I started working on one.
Step 1 Place an ice barrier next to two couches.
<a class="lightbox" href="https://forum.creative.gimkit.com/uploads/default/original/2X/8/8ab5b3b5efb3a0cdfc2337d7cbf4d1e25b7680c6.jpeg" data-download-href="https://forum.creative.gimkit.com/uploads/default/8ab5b3b5efb3a0cdfc2337d7cbf4d1e25b7680c6" title=&q…
Conclusion:
Instead of running for help, please look through the Community Made Guides first to make sure there isn’t already a guide on it. In this case, there are a lot .
If you found this guide helpful, feel free to it and please reply to this guide with your reactions. Thanks, and happy Gimkitting!
33 Likes
I really hope this stops new gims from running to help to post their among us problems the second they j-o-i-n. (for some reason I can’t post that word)
I guess because no j-o-i-n codes rule
Tbh it would be better to have a little notification that tells Gims codes are not allowed, as the j0in restriction doesn’t tell them anything.
2 Likes
I love how no one notices the Spin-Off from the PSA tags
what, the resources and computer thing?
Why do all of my Community Made Guides become group chats
Also, I put this together in four minutes…
1 Like
Well, at least this forum is starting to pick up now. It wasn’t as dead as before.
2 Likes
@NavyCatZ /navycatz_rate post
Another 30 minutes gone from your life
1 Like
Nooooooo I was just about to start on a guide I was procrastinating
so that’s how you do it i wondered why he didn’t rate mine i did the command wrong, picky i guess
Do the guide first @NavyCatZ . Community before Ratings.
1 Like
Well said, community comes first
It’s summer, we’re all bored and the mods aren’t here to punish us