Cool ways to use props 2.0 (Difficulty ⬜ or 0/10)

Continued from

Are you editing?
  • Yes
  • No
0 voters

Props section:


To make an airdrop you need anything crate-like 2 black blackboard legs for strings and a parachute
(don’t I look happy with my materials?)
Step 1 crate
Add your crate object (mine is 3d printer)

(don’t I look happy with my materials?)
Step 2 strings
Take your blackboard leg strings and place them in a V shape
Step 3 Parachute
Take your parachute and place it on the strings like this
And that’s my finished product!
Design by Quimblo

Sci-Fi table/crate thing

So you want to make a sci-fi table/crate thing?
You’re gonna need 5 lasers and a white square barrier transparency 0.4? (not sure)

Step 1 barrier/ horizontal lasers
First place your square barrier then place your lasers like this
Step 2
Then place the vertical laser like this
(lasers may or may not be substituted by red metal poles)
Design by _i_looked_down

Shell/Sea Boss

Made by Gimkiter28
This is how you can create this Shell/Sea Boss looking person using props!
Screenshot 2023-12-09 155124
First, you need to get all your materials of course! Get all these props.

  • A Sentry (Evil Pink Plant)
  • 4 Shells (Pink)
  • 4 Alien Plants (Pink/Purple One)
  • 1 Coral (Small Pink)
    Screenshot 2023-12-09 155813

You don’t need the Golden hot coco Gim ofc.

Next, you want to make sure that the shells are layered below the sentry. This prevents the shells from being in front of the sentry. Attach each shell to each corner of the sentry. You probably have to rotate some of the shells to angle them in place. Also, don’t forget to flip two of the shells for the other side of the sentry.
Then, add the plants(hands) to the ends of each of the shells. Rotate the plants for each corner so they fit in. Again, flip two plants when you get to the other side of the shells.
Final Step, you need to place the coral prop on top of the sentry’s head to act as a crown or any type of headwear. Make sure this is ABOVE the sentry, and not behind it.

And you are pretty much done! Feel free to add any other special touches you want.

Idea: You can also add some lasers at the tip of the hands, make the hands hold a laser(like a lightsaber), or have the hands fire a laser. Thanks to @Haiasi for the laser idea.

Iron man briefcase

items you need : (▃ ⬤put these in the text item) then a metal briefcase tint the items down below

change the sizes a bit to be like the picture and rotate the rectangles to make an X make sure the bottom rectangles are smaller to fit in the briefcase than get the yellow circle
and place it in the middle than get the blue one (make sure its smaller) and put it on top of the yellow circle

it should look like this
Screenshot 2023-12-13 085617
made by mapleOil

Bread box

This is super simple, just place bread in a box:
Screenshot 2023-12-14 6.44.58 PM
design by gimmaster12345

Laser Blaster

A working laser blaster for all of your laser blaster needs.

Screenshot 2023-12-15 12.39.17 PM
Screenshot 2023-12-15 12.40.08 PM
Screenshot 2023-12-15 12.40.43 PM

Original Design By Soccer_King

Olympian Torch

Need a way to light a path, or the entrance to a temple? A few Olympian Torches are a way to add some regal lighting to your map!
Simply Use a metal cup, a yellow barrier with 0.4 Alpha, and a text device with the fire emoji!
Original Design by cheesebox

Airdrop 2.0

(Inspired by Quimblo’s Design)
Using a Large Snow Pile, 4 Blackboard Legs and a Wooden Crate (Or a storage container, depending on the look you want), you can make an airdrop. You can also make a frame for it when its on the ground using a small snow pile instead.

I only made this because I liked Quimblo’s idea for an airdrop, but thought there was room for improvement.
original design by cheesebox

Tape Despenser

Add the masher and you are done! a tape Despenser
Design by caternaught


Lots of text
x1 circular shield
x11 rocks
x10 wooden poles
Use these emojis ( 〇 and :blue_square:) and refer to this picture


Materials: Ad Bases x amount of stairs

First Turn-off collision
Then click the “Change Size” button in the bottom left corner

Then rotate it 180° and place them in a column and it should look like this:


Just, wow, (screams in happiness)
Materials: 2 Ad Bases (Start with 1), and 1 barrier

Rotate 1 Ad Base 90° (doesn’t matter which direction)
Step 1
and copy that Base and rotate it to face the other door
Screenshot 2024-02-05 4.16.12 PM
Then place a barrier and give it these settings:
Screenshot 2024-02-05 4.19.52 PM
Then place it behind the “Doors”
Screenshot 2024-02-05 4.22.08 PM
If you don’t use the barrier this will happen:


lich boss

Fancy gate
Step 1

Step 2 & 3

Step 4

A pan holder

1 spacesuit cabinet
1 pan

Made by: @EGGacha

Space gate

Step one:
Screenshot 2024-02-28 10.51.57 PM
Step two:
Screenshot 2024-02-28 10.54.00 PM
Step 3 add emojis:
Screenshot 2024-02-28 10.56.51 PM
Then, you have your amazing space gate!
Made by: @leo_flowers

DTM from Lobotomy Corp.

You can make Don’t Touch Me from Lobotomy Corporation with an orange space container as the body, barriers for the decals, and a piece of text (클릭).
Screenshot 2024-03-11 9.42.49 PM
Made by Unavailible.

Fancy walls

Place layered stone barriers and stone pillers to make a wall:

By Gimmaster

Dungeon Gate

Get some metal poles, tint them dark grey and place them down like so.
by: the 7th dragon
you could also edit it so that when you press a button, it opens (hides) and closes (shows) the gate….
have a good day!!

Easter Basket with Eggs

Screenshot 2024-03-27 4.49.11 PM
An Easter Basket made with an empty fruit basket and 5 eggs made with barrels that were colored. Click here to learn more

Made By: AlvinFun

Railroad Crossing Signal

Deactivated Signal:

Activated Signal:

This is a railroad crossing signal that I made for anyone who wants to make a railroad or train game. I used 2 barriers and 2 red texts as the crossing gates, 4 lasers for the crossing lights, 2 triggers for when the train presses it, it activates or deactivates the crossing, 1 wooden pole for the sign pole, 1 wooden sign and 2 text boxes (1 red and 1 green) for the bottom sign, and 2 metal signs for the crossbuck.

Made By: AlvinFun


So, here is an image of my Aquarium prop:
If you would like to make it entirely, I made a guide on it here: How to make an Aquarium in Gimkit Creative (difficulty 0/10 ⬜)
Made by GimGulp1

House Light

Here is what we’ll be making:

First, get a black barrier. Turn the border off, and set the alpha to 1.
Screenshot 2024-04-20 at 7.56.13 AM
Now the pole. For this part, I used a rotated pitchfork. Move the pitchfork over the black barrier to where only the curve of the metal is peaking out. Then put the barrier in front of the pitchfork in the layers tab.
Screenshot 2024-04-20 at 7.57.58 AM
Now the light. Get a light yellow barrier with no border and full alpha and a circular shape. Make it fairly small and put it over the tip of the pitchfork.
Screenshot 2024-04-20 at 7.59.38 AM
Make it glow: copy the light and place it right back on top of the original light. Make it a bit bigger. Now set the alpha to 0.5!
Screenshot 2024-04-20 at 8.19.59 AM
Now for the light cover. This is where it gets complicated! Make a white barrier a bit wider than the bulb with no border and an alpha of 1.
Screenshot 2024-04-20 at 8.01.15 AM
Now to give it a curve. Copy the white barrier and place it down. Make it a circle. Change the size so the edges of the circle touch the edges of the rectangle. Move the circle up so the bottom of the circle touches the bottom of the rectangle. Edit the size to your liking.

Oh, you thought we were done??? Lets add a cool border to our cover. Copy the white barriers and place them down. Give them a border. Move the bordered barriers behind the original barriers. It will take some time to do this, but I think it’s worth it for this final result:

Thanks for reading this section!
Fulcrum-19 made this post.

An Oversized tape measure.

You will need:
x1 circle black barrier x1 square grey barrier x1 yellow circle barrier
Make a large circle black barrier, then make a slightly smaller yellow circle and put the yellow inside the black circle. then put a small grey barrier at the corner of the circle. Then put text that says “tape measure” as shown:
Screenshot 2024-05-13 11.23.22 AM
By: gimpenetrable

Working Ladder
🪜 Appearance

First, get 2 metal poles

Then, place smaller sideways poles under and in between the first two poles

Finally, place a metal sign under the ladder and back sure its on the bottom layer

That is the ladder but there are still some issues with it.

⚙️ Mechanics

Right now you can just walk through the ladder so put an invisible barrier on it like this

Next, put an invisible button on the ladder. This will be used to climb up/down (go to extras for down) the ladder to get teleported to a new area

Set up a wire to teleport the player when the button is clicked

And your done! You have made a working ladder in gimkit!

➕ Extra

Extra add-ons for your ladder

🎨 Colors

In order to change the color of your ladder you can click on each pole and change the tint

🕳️ Climb Down

To make the ladder look like you are about to climb down instead of up you can replace the metal sign with a hole emoji using the text device

Fire Hydrant

Needed props: 1 Ceramic plate, 1 Bread, 1 Hydration Drink (Red), and 1 Red chemical, all tinted 128:0:0
First, move the hydration drink onto the red chemical and use layering to show it on top of the chemical.

After that, move the bread to the narrow part of the hydration drink and use layering to show it under the bottle of the hydration drink.

Finally, move the ceramic plate onto the center of the bread, and layer it so that the plate is on top of the hydration drink.

And there you have it, your very own fire hydrant for any urban projects you work on.

Bonsai Tree

Needed props: 1 Ceramic plate (Tint 167:118:73), 1 Evil potted plant (No tint), 1 Dirt (Tint 96:92:92), 2 groundbreaking plants (Tint 143:90:0), and a LOT of leaf props (Tinted to your preference)

First, place the ceramic plate on top of the evil potted plant so that the plant growing in the pot is covered.

Next, place the dirt on top of the plate and use layering to make in show on top of it.

After that, align the groundbreaking plants in the dirt so that it looks as if they come from one stem, and layer them so they show on top of the dirt. Any combination of groundbreaking plants can be used to create your personalized tree, but I recommend the two shown in the picture below.

Finally, copy multiple leaf props to cover the tops of the groundbreaking plants. You can use any design of leaf and any color tint to make a tree that fits the image of its surroundings, or one that really pops. A few of my designs are shown below.

Forum-Related section:

Wiki Editing Rules

Wiki Editing Rules

Please don’t make any of the edits violate the TOS or FAQ, remember, anyone can see who edits a wiki and what part they edit.
Please be responsible.
Everyone, please don’t edit when it is being edited.
You can politely ask in the replies.
Please don’t change the name when it has one, and remove it when you are done.
If you aren’t in the credits, please ask and say what you are doing before editing. This helps keep the document clean.
Don’t make references using @ since you can only do that 10 times in a post.


This is where the designs came from:


If you added something to the guide, put your name here.


















Good…now time to think up some more!


Theres a part 2 now??

1 Like

yup! We were almost out of characters on the other one.

@WhereIsMyHat what was your old pfp? id like a photo pls Imma sorta copy ClicClac’s background idea thing for the profile…


I see… Well this is pretty cool!


I’ll be sure to add some stuff when I get the chance…


Yeah, it’s gonna help.



Can someone add this for me because I always manage to mess up on wiki edits lol
Barrier Bedside Table
A nice, cyber-themed table that may or may not kill you.
Screenshot 2023-12-08 5.13.19 PM
Using a barrier and 5 lasers.

1 Like

@Quimblo once you’re done editing can you add a Credits, Permission List (add @trust_level_3 and wait for people to ask) and Wiki Editing Rules?

Copy it from my Among Us TUG which most wikis use now for some reason lol :man_shrugging:

Wiki Editing Rules

Please don’t make any of the edits violate the TOS or FAQ, remember, anyone can see who edits a wiki and what part they edit.
Please be responsible.
Everyone, please don’t edit when it is being edited.
You can politely ask in the replies.
Please don’t change the name when it has one, and remove it when you are done.
If you aren’t in the credits, please ask and say what you are doing before editing. This helps keep the document clean.


You go on ahead @Haiasi


Can i add this after haiasi (i can barely pronounce that name) is done?

1 Like

I’m done editing @Quimblo


@VoidFluffy What transparency is the barrier?

man part 2 already
(please ignore I need 20 characters)

1 Like

We had too. We ran out of characters on the first one.


dang it feels not too long a go since I first added something

1 Like

Well, yeah. It hasn’t even been up for more than a month or so.



1 Like


1 Like

I just added the Shell/Sea Boss to the wiki!

1 Like