Randomizer not working

[lycanthrope66]

I used a trigger with block code but something is wrong with the output

[WolfTechnology]

It depends on what you are trying to randomize, but here are guides that explain how to make randomizers for all different occasions.

Use Randomizers to Mimic Machine Learning

In Gimkit creative, people have created randomizers. And yes, I know that they’ve been around for a while, so why am I bringing this up? Well, I thought that you could theoretically code an AI using randomizers. And yes, this isn’t really an AI, but it’s probably the closest thing we have to an AI for a while. So, what you would do, is you would have one randomizer that could choose between 4-6 actions it could perform, so it’s a bit simple. When one is selected, it broadcasts to another randomi…

How to Get a Random Weapon Upon Knockout! Difficulty or 2/10!

Introduction: In this guide, you’ll learn how to get a random weapon every time you knock out a player or sentry. This is very easy but tedious. You also may need to know a bit about block code and properties for this guide, but overall it shouldn’t be too difficult. Granting The Weapons: What you’ll first want to do is place a lifecycle and set the event to “Player Knocks Out”. Now, place down a trigger with delay “0.1”. Wire the lifecycle to the trigger like this: Event occurs → Trigger …

How to make a Map Organizing Randomizer | Difficulty 2/10

Confusing Title, right? Well, let me make it clear. I’ll be showing you how to make random props, like trees and rocks, show on game start. First, place a lifecycle. Make sure it’s like this: [Screenshot 2023-10-10 at 4.40.52 PM] Next, place a trigger. Wire the lifecycle to this trigger. Make its blocks like this: [Screenshot 2023-10-10 at 4.42.44 PM] Now, place all your props, and make them deactivated on game start. Make them activate on grouped channels. Like, some trees would activate…

How to make a randomized door opener ()

This is a guide showing Gimkit users how to make a randomized door opener! You will need: Button (1) Trigger (As many as you have doors) Barriers/Props [To act as the doors] (As many as you want!) [DISCLAIMER: In this tutorial, we will be working with 3 doors.] First, make a contraption like this: [Screenshot 2023-08-21 at 4.36.34 PM] (Make sure the trigger cannot be visible in game or be triggered by collision) Go into the trigger and select blocks. Make a setup like this: [Screenshot…

How to make randomizer

1: What you’ll need: one repeater (yep that’s it) 2: open blocks and create a custom variable called num 3: make this (to create the if then else click the gear on the if-then block and add if else to the if block in the gear) [Screenshot 2023-05-24 4.40.06 PM] 4:Connect your input and output and you’re done! (make sure output is connected to the broadcaster channels) PS:this is infinitely expandable.

[Gim_Fishy]

what is wrong with it?

[lycanthrope66]

I connected it to a vending machine with a wire to give the player a random weapon but its doing nothing

[WolfTechnology]

Did you use this guide?

How to Get a Random Weapon Upon Knockout! Difficulty or 2/10!

Introduction: In this guide, you’ll learn how to get a random weapon every time you knock out a player or sentry. This is very easy but tedious. You also may need to know a bit about block code and properties for this guide, but overall it shouldn’t be too difficult. Granting The Weapons: What you’ll first want to do is place a lifecycle and set the event to “Player Knocks Out”. Now, place down a trigger with delay “0.1”. Wire the lifecycle to the trigger like this: Event occurs → Trigger …

or this guide?

How to make randomizer

1: What you’ll need: one repeater (yep that’s it) 2: open blocks and create a custom variable called num 3: make this (to create the if then else click the gear on the if-then block and add if else to the if block in the gear) [Screenshot 2023-05-24 4.40.06 PM] 4:Connect your input and output and you’re done! (make sure output is connected to the broadcaster channels) PS:this is infinitely expandable.

Or no guide at all.

[lycanthrope66]

I used the second guide

[lycanthrope66]

also sorry for being a bit flaky I´m juggling three things at once

[WolfTechnology]

Ok so were are you getting stuck on.

[lycanthrope66]

it says I need to do something with the input and output but I cant find either

[WolfTechnology]

That is not in the clock code, more or less the devices wired to the repeater. Because that is input and output.

[lycanthrope66]

okaaay so how do I get it to work with the vending machine?

[WolfTechnology]

When item purchased(input), begin repeater function

[lycanthrope66]

I´m using a trigger but I assume I should connect it to a repeater?
(the repeater doesn’t have the block function)

[WolfTechnology]

yes, you should, but the guide is a bit vague so it does not give much info on what was used.

[lycanthrope66]

I dont have begin repeater function…

[WolfTechnology]

That means start repeater, its just a more formal way of saying it.

[lycanthrope66]

ready for a playtest thank you

[WolfTechnology]

Your welcome, let me know if you need more help.