How do I make lasers go on and off

[wingwave]

Maybe try checking out these guides:

(Updated!) How to Disable And Enable)Lasers using a Game Overlay! (difficulty: 2/10 or )

Hey! This guide will teach you how to disable lasers, at the push of a button on a game overlay! (Update: added bonus section + minor changes) This guide requires… 1x Game Overlay 1x Laser Beam Manager Any Amount of Laser Beams Step 1: Getting what you need Place a game overlay, a laser beam, and a laser beam manager down. [Screenshot 2023-09-22 11.32.37 AM] Step 2: Setting up Game Overlay Set the overlay type to Button, and set the overlay text to Disable Laser. [Screenshot 2023-09-23 8.01…

Lasers that alternate on and off! ()

I am aware that there are several posts on this. However, I have not seen anyone else do my strategy, so I am posting my own. Other Topics Materials: Lifecycle *1 Wire Repeater *1 Repeater *2 Laser Beam *1 Place down the Lifecycle and the wire repeater. Set the Wire Repeater delay to 5 seconds. Wire the together: Event occurs → Repeat the wire pulse Place down both repeaters, each one with the following settings (they are identical) [image] Wire the lifecycle to one repeater: Even…

Configurable timed lasers (Difficulty: )

What you’ll need: lifecycle, repeater, laser, and wire repeater Set the life cycle to listen to the game start. Connect the life cycle to the repeater (Event occurs: start repeater) Connect the repeater to the wire repeater (repeater runs task: repeat the pulse) [Screenshot 2023-05-26 8.43.34 AM] You should have something like that ^^^^ Connect the wire repeater to the laser (wire repeater receives a pulse: deactivate the laser Connect the repeater to the laser (Repeater runs task: Activate …

Welcome to the forum, @Ethan! Check out the #new-user-must-read and forum-tips for more easy help! Read the Community Guidelines for a gist of the rules. If you ever run into a hard problem, just ask away! After all, this is a community forum!

Remember to mark a solution to avoid clutter!