Help With Barriers

[California_Love]

You know how in One Way Out where you had to give something for an area to be unlocked? Like, with keycards to unlock another area?

Is there a way to allow that in Creative?

[WhereIsMyHat]

There is definitely a guide on this.

[WhereIsMyHat]

You could customize this

How to Make a Barrier that Doesn’t Block Bullets [Difficulty 1-2/10 or ]

Ok, you have heard how to make a barrier that only blocks bullets. But what about one that only blocks players? This, my friend, is very similar. Follow that guide, but set the barrier to be not active on game start, and instead of deactivating it on the relay, activate it! So, basically, change the name of the channel deactivatebarrier to activate barrier, and put it in the activate barrier when receiving on setting in the barrier. Now you have a beautiful barrier that only blocks players! …

[California_Love]

Thanks! I will read this!

[WolfTechnology]

You use a vending machine and wire it to a barrier and set the vending machine to key cards and the number you wish it to have then when the keycards are taken from players, the barrier will deativate.

[The_7th_Dragon]

How to open doors with items (Difficulty: 2/10 )

This is my vault. I want to make it so that only people with a Blue keycard can access the vault. If you want to make something like this too, read this guide! [Screen Shot 2023-10-06 at 6.56.54 PM] Place down a barrier as a door. You can customize the appearance of it as much as you like. [Screen Shot 2023-10-06 at 6.58.48 PM] Set the properties of the barrier to this. [Screen Shot 2023-10-06 at 7.11.39 PM] Add a button next to the door. Make sure it has a good hitbox. [Screen Shot 2023…

[WhereIsMyHat]

Also, this might have something.

One Way Out Collection

Here is my One Way Out Collection! This time, I used other people’s guides and credited them.

Logs/Reports

There is a <a href="https://forum.creative.gimkit.com/t/how-to-make-a-case-log-just-like-in-one-way-out-difficulty/1337">guide for this part.</a> I have explained this before, but you just need to place a prop, a button under the prop, a popup near it, and wire the button to the popup (button pressed>open popup). However, you can do the same thing, but instead of a …