What is it that you need help with?
1 Like
I can make jumpscares btw lol
1 Like
They need help making Five Nights at Freddy’s
1 Like
Well I figured as much, but what part of fnaf?
1 Like
Welcome to the forums, @Confused !
2 Likes
MrEgg
September 25, 2023, 10:03pm
7
to make the robots move use this guide to help you
[image]
Did you know that sentries are subject to entering zones and teleportals?
Well today, I will be using that mechanic to create a sentry that will move from place to place while carrying damage over.
What you need:
Sentry x1
Zone x2
Wire Repeater x2
Teleportal x2
Place down your two teleportals. These willl be the locations that the sentry will teleport to.
Place down a zone on each of your teleportals.
Place down your two wire repeaters. Make the delay to 3 seconds. Wire the fi…
2 Likes
Here is a guide that could help
Step 1: Place a black barrier in your room and size it to fit your room.
[Screenshot 2023-09-10 06.41.25]
Step 2 : Set that barrier to have no collision, no border, and a lower alpha ( you can change the opacity to make the room darker your lighter )
[Screenshot 2023-09-10 06.43.38]
Make the barriers on the “above” layer
You can find layers in the top left
[Screenshot 2023-09-19 16.26.39]
[Screenshot 2023-09-19 16.27.05]
Optional Flashing lights You could have two barriers (the same) se…
1 Like
Maybe try looking through these posts:
I’m currently making a fnaf map, any tips or suggestions?
I’m working on a fnaf 1 map, and could use some prop tips, device tips for the game mechanics, and more!
i have made a functional Fnaf game but the doors are not good. there are buttons for closing and opening on each door. how to make this so there is only one button?
I’m trying to make FNAF 2 in gimkit, but I need to make a line for each vent, and there are three animatronics in each!
I have tried using checkers, but it doesn’t use the property.
Step 1: Place a black barrier in your room and size it to fit your room.
[Screenshot 2023-09-10 06.41.25]
Step 2 : Set that barrier to have no collision, no border, and a lower alpha ( you can change the opacity to make the room darker your lighter )
[Screenshot 2023-09-10 06.43.38]
Make the barriers on the “above” layer
You can find layers in the top left
[Screenshot 2023-09-19 16.26.39]
[Screenshot 2023-09-19 16.27.05]
Optional Flashing lights You could have two barriers (the same) se…
Is there anything specific you need?
Welcome to the forum, @Confused ! Check out the new-user-must-read and forum-tips for more easy help! Read the Community Guidelines for a gist of the rules. If you ever run into a hard problem, just ask away! After all, this is a community forum!
2 Likes
Welcome to the forum! Is there anything specific that you need help with?
1 Like
Welcome to the community @Confused !
1 Like
Thanks for all the support!
2 Likes
Your welcome, its just a thing we do, it shows the hospitality we have as a community.
1 Like
Mhm! But first, have you made the map yet @Confused ?
1 Like
Well, I need help doing just that too.
2 Likes
That may be possible be activating a barrier that is blue and a circle.
1 Like
hewwo
October 26, 2023, 5:11pm
17
@wingwave is really active lol
maybe get players to be animotronics and the whole map is the tag zone