Item and Go Seek

[AverageRagr]

How would I create a way so when players enter a specific area, they have to find a certain item in a certain time limit (ex. 300 seconds, 5 minutes) and bring it to an area to enter the next area?

[speedy_kd4]

have 2 zones and a counter, make it so when players enters zone (area with item.) counter starts. and when they find the item and go to next area, counter disables. that’s my way of explaining it anyways

[AverageRagr]

I just have one last Q&A, how would I make it so when the counter reaches 300, only one player dies, so it will vary per player?

[gimkit_h4ck3r]

You could use a (relay set to random player) Relay Trigger --> Respawn Player(Respawn)

[Haiasi]

it automatically only happens for the triggering player, the player who entered the zone unless you use a relay (all players) to make all players die
also, as for @speedy_kd4 you need either a repeater clock or trigger clock to increment the counter, it cant start a countdown all on its own.

Trigger Loop Explanation:

@gimkit_h4ck3r

The Trigger Loop

This loop is much like the previous one but with two triggers. This allows it to have a wide range of intervals, creative ways of stopping and starting, and can even use the block coding mechanic in some devices.

Examples of the Trigger Loop and its Options

@speedy_kd4

counter disables

to add on this,

How To Deactivate Un-deactivatable Devices. Difficulty 1/10 or

This is one of the easiest guides. Say you want to deactivate a counter that decrements after a repeater runs a task, but you don’t know how, and there’s no option to in the settings. Well, all you have to do is wire the repeater to a trigger, and the trigger to a counter. Make it so that when receiving on a channel, it deactivates the trigger, therefore cutting off the connection from the repeater to the counter. What about deactivating a lifecycle? Well, all you have to do is make it so th…

also, you dont need to deactivate the counter, you just need to deactivate the zone

basically

(Zone) Player Enters Zone —> (Trigger 1) Trigger

(^ Starting the Trigger Loop)

(Trigger 1) Triggered —> (Trigger 2) Trigger

[spoiler] (^ Starting the second Trigger in the loop) /spoiler]

(Trigger 2) Triggered —> (Trigger 1) Trigger

(^ Making sure the loop doesn’t stop by connecting the second trigger to retrigger the first one)

(Trigger 1) Triggered —> (Counter) Increment Counter

(Trigger 2) Triggered —> (Counter) Increment Counter

(^ Set a Target for the Counter for how long you want it to run.
ex. both trigger delay = 1, make counter target 300 for 300 seconds)

(Counter) Target Value Reached —> (Checker) Run Check

(Checker) Check Passes —> (Zone 1) Deactivate Zone

(Checker) Check Passes —> (Zone 2) Activate Zone

(^ checking if the player has the item, deactivating the previous zone and activating the next)
(if the check passes, of course)

if you want an event to occur when the player didn’t reach it in time

(Checker) Check Fails —> (Device) Run Action

[AverageRagr]

Just one last thing : ). How would I create the leaderboard so it measures how long person was alive for? Like Snowy Survival, last player alive wins.

[StacheIsTaken]

How to make "Seconds Survived" on the Leaderboard

No guide on this yet, so why not post it? You will need: Property 1x Counter 1x Trigger 1x Tag Zone 1x Lifecycle 1x Property Settings: Name: Secs Type: Number Default: 0 Player-scoped Tag Zone: Tagging Team: Team 2(Or whoever is Tagging) (Your average tag zone) Make sure DO NOT RESPAWN WHEN TAGGED Counter: Player-scoped Starting Value: 0 Update Property: Secs Trigger: Invisible, no collision Trigger receiving on: Trigger Triggered, transmit on: Trigger Player-scoped Life…