I'm currently making a fnaf map, any tips or suggestions?

[linksalIy]

I’m currently making a fnaf map, any tips or suggestions?

[Haiasi]

This guide might help:

How to Make Flashing Lights | Difficulty 2/10 or

Hey guys! Another Guide is rolling out! This could help in making Among Us, but of course, I don’t think there is a way to make only the Imposter to be able to see. Okay, first of all, place a lifecycle. Place a barrier(device), make it 0.7…001 visible, make it black, make it have no border. Place down two repeaters. Both should have settings 0.5 intervals, stopping After receiving on Channel. Also, wire the lifecycle to the first repeater, starting it. [Screenshot 2023-09-06 at 4.57.47 PM] …

[NavyCatZ]

How to Make a Sentry Move while carrying damage over! ()

[image] Did you know that sentries are subject to entering zones and teleportals? Well today, I will be using that mechanic to create a sentry that will move from place to place while carrying damage over. What you need: Sentry x1 Zone x2 Wire Repeater x2 Teleportal x2 Place down your two teleportals. These willl be the locations that the sentry will teleport to. Place down a zone on each of your teleportals. Place down your two wire repeaters. Make the delay to 3 seconds. Wire the fi…

[NavyCatZ]

Welcome to the forum!

Welcome to the Forums!

Welcome to the forums! This is a short guide that will teach you about them. Please read the sections below! Posting Questions Questions belong in Help. Remember to write your problem with detail, so you can be better helped! If you have a suggestion for the gimkit developers, this isn’t the place for it. Post suggestions here. Marking Solutions If someone answers your question, mark it as a solution! Just click this button under their answer! [image] Limits On your first day here, you will …

[Jobozo1875]

Welcome to the Gimkit Creative Fourms!

[WolfTechnology]

Welcome to the Community @linksalIy!

[wingwave]

Welcome to the forum, @linksalIy! Check out the beginner-must-read and forum-tips for more easy help! Read to Community Guidelines for a gist of the rules. If you ever run into a hard problem, talk to anyone who has the word “Regular” next to their profile name. They can help you with hard and in-depth concepts and mechanics!