Hello, fellow Gim-kitters & forumers!!!
Today we’ll be making Video-Game Characters!!
The Capped Way to Make Steve. 6/10
Final result:
First, set your grid lock to 32 & have the grid show… DOOOOO IIIIIIIIT!!!
2nd, grab a brown rectangular barrier and make it 8 blocks across & 2 blocks tall. This is Steve hair.
3rd, grab 2 brown rectangular barriers. The barriers should be 1 block wide and 2 blocks high. Put the upper half of each barrier on the bottom corners of the barriers from Step 2.
It should look like this.
4th, add a tan barrier that is 4 blocks tall & six blocks wide. DO NOT QUESTION IT JUST YET! Put it between the hair that we Put in last step. The top row of it should be underneath the hair, so only it looks like it is only three blocks high.
5th, add two white barriers that are 2 blocks wide and 1 block tall.
Place them so that there are two blocks of Steve between them and 1 block of Steve from the edges of his head.
6th, (Ignore this if you want Herobrine) add two 1 block by 1 block blue barriers.
Place them on the inner eye, (Closer to the center)
It should look like this so far,
7th, add a 6 wide by l tall, tan barrier and put it in so that the edges of the barriers are under the outer edges of the eyes.
8th, add a purplish brown, 1 block tall, 2 block wide barrier between the eyes one block lower.
9th, add a lighter brown 8 blocks wide by 1 block tall and place it so that the center of the barrier is under the nose.
10th, add a light brown barrier 8 blocks wide by 1 block tall and place it so that the center of the barrier is two blocks under the nose.
11th, add two lighter brown (same lighter brown as before) barriers that are 1 block wide and two blocks tall. These go in the corners of the lighter brown layer of the Steve head so that the lower square goes on that bit making the lower square look invisible.
12th, add a brown barrier that is 4 blocks wide and 1 block tall. It goes in the canter of the lowest row of Steve’s head.
Finally, add two brown barriers that are 1 block wide and 2 blocks tall. These go in the edges of the barriers from the last step and should be placed so that the
bottom squares are on the edges of the barrier.
It should look like this,
The Capped Way to Make Kirby. 2.5/10
Final Result:
1st, grab a pink barrier that is circular.
2nd, add two deeper pink barriers that are much smaller and circular.
It should look like this so far,
3rd, add a dark purple barrier that is circular and smaller than the body but much bigger than the blush barriers. The top of this barrier should be in between the blush barriers.
4th, add two black barriers that are circular. Put them above the blush barriers.
5th, add two white barriers that are circular and smaller than the black barriers, and put them inside the black barriers.
Your progress should look something like this so far.
6th, add 2 pink, circular barriers to the side of the body
7th, add 2 red, circular, medium-large-ish barriers to the bottom of the pink barrier from the very 1st step.
Your final result should look similar to this.
The Capped Way to Make Crash Bandicoot. 8.75/10
Final result:
1st, grab 2 white barriers and place them next to each other. These will be the eyes.
2nd, add an orange barrier and place it between the eyes. The bottom of it should be tilted slightly towards the right.
3rd, place an orange barrier under the right eye. The right side of the barrier just ever so slightly tilted up.
WARNING HARD STEP + CURSED PHOTO COMING!
4th, add 4 tan barriers like in the final result.
5th, add a small rectangular black barrier, tilt it, and put it between the tan barriers and the orange barrier.
This is also what your Crash should look like now.
6th, add a green, circular, medium sized, barrier in the eyes.
7th, add a black, circular, medium-small sized in the green barriers from the last step.
8th, add a white, circular, small sized barrier in the black barriers.
It should look like this so far.
This looks so much better, but he still looks like a grandpa who forgot to put his dentures in. So let’s add teeth next.
9th, copy and paste the bottom tan barrier, turn it white, and move it, just ever so slightly, up. (This should be on a lower layer than the tan barrier.)
10th, add a thin, white, rectangular barrier and place it under his upper two tan barriers. (This should be on a lower layer than the tan barriers.)
11th, add a pink barrier and tilt it so that it looks like a flavor muscle.
12th, add two dark brown rectangular barriers above his eyes.
Crash is looking good now! Right?
Time to do his signature hair.
14th, get a maroon barrier and tilt it like in the final result.
15th, get a brown barrier and tilt it like in the final result. (This should be on a higher layer than the maroon barrier.)
16th, get another maroon barrier and tilt it like in the final result.
17th, get another brown barrier and tilt it like in the final result. (This should be on a higher layer than the maroon barrier.)
18th, remember that orange barrier between the eyes. Lengthen that so that it goes just past his mouth’s corner on the left side & just past his right eye on the right side.
19th, copy the tan barrier that the flavor muscle barrier is going over. Make it the same orange we’ve been using this entire build & place it to the left and on a lower layer than the barrier we copied. The side of it should be in the tan barrier.
Crash can’t hear you. He doesn’t have ears!
Let’s change that.
20th, copy and paste the flavor muscle & turn it orange, twice. Place one in the top right corner of his head. Tilt the other on 90 degrees and place it on the top-left corner of his head.
The Capped Way to Make Samus Aran. 4/10
Final Result:
1st grab a red, circular, barrier.
2nd, grab 2 dark red barriers. Place them on the sides of the first barrier.
Samus should look like this so far.
Samus can’t breathe! She doesn’t have her breathing tubes! Let’s let her get some fresh Metroid air.
3rd, add two text devices. Change the font to Roboto & type this symbol ). Place them so that one side touches the edge of the dark barrier and the other side touches the edge of the main barrier.
Now, she can’t see!
4th, add a lime green barrier. It should be a tall rectangle, but almost square. Put it on the lower bit of the main barrier.
5th, add two more lime green barriers. These should not be almost square.These should be tilted so that one side touched the top of the last green barrier.
Now, you’re done!
The Capped Way to Make R.O.B. 1.75/ 10
Final result:
1st, get a white rectangular barrier.
2nd, get a red circular barrier and shrink it as much as possible place it like this.
3rd, get a black barrier that is rectangular and just smaller than the white barrier.
4th, get two navy blue barriers that are circular. Place them inside of the black barrier.
5th, add 2 small white barriers & put them in the corners of the eyes.
Now you’re done!
Did you enjoy building these characters?
Which was your favorite?
Wiki Rules:
Ask me if you can edit if you’re TL2 or lower.
The title of your character’s section should hint at your username or pfp
Don’t delete anyone else’s work
Don’t edit while someone else is editing
Check the box while you’re editing
Only Check While You’re Editing, NEVER for fun.
Bye Emote
