Helloo there! Today I’ll be showing you how to make sweets with barriers or props!
Are you editing?
How to make CANDYLAND.
This took me very long, and would be half of the guide combined if I taught you how to do it, but:
How to make boba tea!
Image:
First, you get some barriers that are beige and arrange them like this.
Now get a barrier of the same color and fill it in.
To make the seal on the top get a green barrier that is a thin rectangle and put it on top.
To make the seal more circular, get two tiny circles of the same green and put them on the edge.
For the straw, make it brown and make it wide enough so that the boba can fit through!
For the boba, get some black circle barriers and place them how you like near the bottom half of the cup.
Finally to make some lighting effects, and this is the hardest part, get two rectangles that are a very light beige and put the transparency to 0.60. Then place them like this.
And that’s how you make boba tea!
Created by @BrownSugarAlien.
How to make Macarons
Image:
First, place down three circular barriers with an alpha of 1.00
make two of them lighter, and the middle one darker
Next, place down blueberries from Item Image, and make a darker barrier on the top of it.
Then put some text on it as sprinkles, that’s basically it.
Add whatever you want, and yeah.
skkdnednwkdnednekdnedkendkesmsmdek
look at how low quality it is, wowzers.
by @NotYoyo
hey
also guys make sure to leave a like to BSA if you like this
jahahahaha
bye I guess
How to make a Dango
Image:
You will need a Dango, that’s it
just kidding, first, you will need three circular barriers as shown:
then, place down two metal poles, made them dark and tilt them, place down and make sure it looks like this:
Optional: use texts as sprinkles to decorate it
final result:
By NotYoyo.
How to make a Lollipop/Sucke.r
Step 1
Grab a pole(metal to be exact).
Put this pole on the below level.
Step 2
Now get a barrier and make it a circle
Make the barrier’s alpha 1.00(obvi)
Make the barrier any color you want!(i chose purple)
Put this barrier on the primary level
Place the barrier on the metal pole like this:
Step 3(FINAL STEPPPP)
Grab ANOTHER barrier and make it a rectangle.
Now change it’s proportions to make it look like this(remember to turn off outlines cuz i didn’t):
Set it’s alpha to 1.00.
Put this barrier on the above level
Now make the barrier a darker color than the lollipop’s original color.
Place onto the lollipop’s base and BAM!
Lollipop.
Created by @gimkitnoobie.
How to make a chocolate chip cookie.
Step 1. Get a light brown barrier.
Step 2. Get a bunch of brown circles and put them on top.
Step 3. Finally, put the cookie on a cutting board.
And that’s how you make a chocolate chip cookie!
Created by @BrownSugarAlien.
How to make an Ice Cream cone.
Step 1. Get a white barrier and place it down. (Whichever color you want)
Then, get five smaller circles of the same color and put them around the circle like this.
Step 3. To make the cone, get two light brown barriers and place them like this.
Step 4. To fill it in put down as many as you need and for the bottom add a circle.
Step 5. get thin darker rectangles and put them like this.
Step 6. For the sprinkles use text and turn them into hyphen. Then put them on like this.
Step 6. Get a circle and another hyphen and place it like this for the cherry.
Step 7. Finally, get some poles and arrange them like this.
And that is how you make an Ice Cream Cone.
Created by @BrownSugarAlien.
How to make a donut
Materials:
A ton of barriers
Lets get started!
1st, place a brown barrier [1]
Then, place a black barrier in the middle (as the hole)
Then place a bunch of different colored rectangle barriers that act as sprinkles (make sure that they are layered above the circular barriers!
I had a rather interesting selection of shades for this build, but nonetheless, I hoped this helped
Created by @Bardy_2913.
How to make a pop rock packet.
First get a pinkish reddish barrier and place it down.
Step 2. Get some text and make it yellow in the Fugaz One font and place it down. Then copy the text, make it a darker yellow and place it behind it.
Step 3. Get a pink barrier and place it behind the texts.
Step 4. Get some text and make it say original in a black color.
Step 5. Get two texts and make one red and one black. They both have to say cherry. Then do the same thing with the other text and place them down.
Step 6. Get some black text that says ’ Artificially flavored ’ and place it below the cherry.
if you want you can add the cherry emoji next to the word cherry.
Step 7. Get a pink barrier and place it down behind the word cherry and artificially flavored.
Now get an ordinary black rubix text and text ’ Still popping after 30 years! and place it down.
Step 8. Get a black GALINDO text and and go to the strok.e section and make it ten and place it down.
Step 9. Get some barrier that are small squares and make them red. Keep copying them until you are satisfied. And add one more cherry emoji and place it down.
That’s how you make a pop rock packet.
Created by BrownSugarAlien.
How to create rock candy
first make a tan stick out of a barrier:
then ad a small light blue barrier and tilt it slightly:
then add a darker shade of blue on top:
then repeat and fill up your stick!
-Your_L0cal_Weird0
How to make M&M's (chocolate)
Make a small circle (or big if they’re big M&M’s)
Make the Alpha 1 (fully non-transparent)
Get a text box, make it almost as big as the M&M and put M.
Make as much as you want (change color to decorate it!)
Credit to @oof-sister
How to make Oreo’s
Grab a barrier and make it a circle, and dark, BUT NOT COMPLETELY BLACK.
Then copy that barrier and make it white, and put on top of the first one, but a bit further back.
Next, copy the original black barrier and put it on the very top.
Then grab a textbox and write “oreo”. then put it on top of the top barrier.
After that, get another text box and copy & paste this triangle symbol: ◥, but DON’T put it on the oreo.
Then copy it and arrange it till you’ve made a kind of square. but with a gap in between each triangle.
Then copy it all together and make a sort of circle around the word oreo with them, but not a tight circle.
then get the ⬭ symbol and change it size to fit right around the word “oreo”
Grab milk and dunk the oreo in it. Enjoy!
Final result:
by Grahamathan15
How to make Tanghulu (糖葫芦)
Step 1. Get a metal pole and place it down. No shadows.
Step 2. Get an item image and make it a strawberry. Then place it on top of the pole. Make sure it’s big enough.
Step 3. Put a plate underneath it. Make it very big.
Step 4. Repeat the steps for the previous strawberry stick and make other fruits!
And that’s how you make Tanghulu!
Created by BrownSugarAlien. (You don’t need to use an orange)
How to make a candy!
final product:
(I tilted the candy, but you can just not do that!
Step 1:
Get a barrier and make it circular. Tint it based on the color you want the candy to be!
Step 2:
Now, get a rectangular barrier and tilt it like this.
(make sure the barrier is the same color as the circle barrier.)
Step 3:
Now, repeat step 2 and make something like this.
Step 4 :
Then take 2 more rectangular barriers and tile them so they make a weird little triangle.
Step 5:
Now, take small circular barriers and use them to cover up the space in the triangles.
Step 6:
Add slightly different colored barriers and tilt them like this
Step 7:
Now, add details using item images, barriers, and text
voila!
made by @NPC_da_CPU
Eclair ( diff flavors!!)
Eyyy Suki the house anyway *turns on French accent Ladies and gentlemen tuday I will be showing u how tu make an eclair in gimkit!now first things first put down one bread(prop),you may make it any size you want but I recommend big to start then group everything at the end and make it smaller Next grab around 3-5 ceramic plates and make them medium size then put them on the below layer then place them directly under the breadNow here’s where u gotta choose,either strawberry or chocolate or both ! but one at a time
Strawberry eclair
make sure u do the steps above first
ok now grab item image and type strawberry! then put the item image on the below layer and then move it directly under the plates. ull need 4-6 of em’.
Then just copy the bread that u already have and turn it 180° then move it to the below layer ( make sure its the most below!) and put it under the strawberries! then ur done congrats!
Chocolate eclair
make sure u do the steps above first ok to add the chocolate first grab a barrier make the colors R: 36, G:11,B:0 then off borders make the shape a circle move it to the above layer and then make the alpha 1.00 make the circle not too small but not too big then copy them at least make 5-6 and put them on the bread!
Then copy the bread and and turn it 180 ° then put it on the below layer ( make sure it is the very last or at least below all the other things used in the Eclair ! ) then put it below the plates ! done !
I hope u had fun making an eclair! As always stay safe and keep smiling! also u better leave a like for bsa!!! ( this is a topic I would of never thought of making!!!)
- suki-moon
How to make a strawberry cake!
Step 1. Put a white barrier in between 2 light pink barriers.
Also, make the white barrier bigger than the pink ones.
Step 2. Put another pink barrier on the white barrier.
(You might need to do a bit of layering though)
Step 3. Put a thin white barrier on top.
It should look like this:
Step 4. Put white circles for a ruffled edge.
Overlap the circles so it looks like this.
Step 5. Put strawberry item images and other things if you want.
And you’re done! Made by @Cats123.
How to make an ice bar
Step 1. Get a brown rectangle and place it down. (Different depending on the flavor)
Step 2. Get two dark brown rectangles and place them on top of the darker rectangle.
Step 3, for the stick, get a light brown rectangle and place it underneath. And also add a circle.
Step 5, go and sell it to the person next door.
Step 6. (Optional) You can add a circle on top of the ice bar to give it a curved look.
And to do that I’d make the dark rectangles longer.
And that’s how you make on Ice bar! Made by BrownSugarAlien.
how to make Creme Betweens
I love Creme Betweens, don’t you too?
you will need - 5 barriers, and a text.
first, get 1 Cre, 1 Me Bet and 1 Weens.
arrange them together…
add those two sticks in the sides…
and add the text.
and you have your Ripoff trash ore- Creme Betweens!
anyways, have a goofy day! - itzjdat
Milkshake!
what you will need: barriers.
grab the cup!
put the milk!
add the ice cream!
and now for the finishing touches… get your poki (choco stick made of bread)
and your cherry.
you are done.
enjoy! - itzjdat
strawberry and chocolate poptarts
Hi, it’s spyde and i’m making poptarts!
First lets start with the strawberry one! get a barrier like this
Then add a barrier in top of the first one like this
Then add these little pebbles like this
You’re done with the first poptart! Now lets go make the chocolate poptart! Make a barrier with a brownish color like this
Then add a darker brown part like this
And add little sprinkles like this
And you’re done! Thanks for reading!
Pie (any type)
Real Image
This pie can be adapted to make any kind of pie you want!
First, get a barrier and turn it a golden-brown colour. Make the alpha 1.00, and make it a small rectangle shape. Turn borders off.
Add a few more:
Then, get a circle barrier the same colour and with the same settings, and place it on top like this:
Grab a few more circle barriers, smaller this time, with the same settings but just a tiny bit darker.
Arrange them on your pie base like this:
(I had to change the colour because they were still too light)
Then, get one of your original barriers, make it quite thin, and put it over the top of the circles to cut the tops off. Make sure it’s on an above layer!
Finally, if you want to put it on a plate then here’s an optional step. (I tidied the pie up a bit here as well.) Grab a plate prop, put it on a layer below all your barriers, make it larger and stick it underneath!
thanks for reading!
How To Make Kaju Katli
First, make the outline of the sweet, using barrier, make the color 225, 202, 148.
Then, make the silver tinfoil also using barriers and place it on what would be the upper part of the sweet, use the color 135, 135, 135.
Then, the beige color will be for the sides of the sweet, use the colors 255, 227, 163.
And your Indian sweet is done! Compliments by Toothless!
- If you want to edit, you need to be regular or get my permission.
- List your ideas in the Ideas section!
- And you are allowed to make an idea that you created, just list your name at the bottom of the idea once finished. And list your name in the ideas section next to your idea!
Thanks for checking this out!
- Beginner
- Easy
- Medium
- Hard
- Super Hard!
- Gimpossible! Explodes.
For more delicious sweets, check the guide below.
Or a different color depending on the flavor ↩︎