So the trigger doesn't work

Bugs
1

So I was trying to make the download file from among us so I built this:

Screenshot 2024-10-22 1.19.57 PM
Screenshot 2024-10-22 1.19.57 PM777×519 147 KB

and the triggers wont work. I know that it is broadcasting the channel because the camera point activates, it’s just the triggers, and repeater.

So the first trigger to the far left triggers on the first channel so does the top left of the triggers but it cycles a loop with the other ones to deactivate and activate the gim’s. the repeater also isn’t working and it starts on the channel and makes it so it goes down the counter and sets the text.

Problem: The counter is not going down, the text isn’t being set, the gim’s aren’t moving.

1 Like
2

Wait just in, the repeater is working because it is doing the counter, its just not setting the text.

3

it will help better to use wire repeaters to have the text show

4

ARgh repeater /j
What makes the far left trigger trigger

2 Likes
5

I kind of trust wire repeaters more than repeaters sometimes but for code, repeaters

6

download Time the starting channel Never mind remedy that

7

check what trigger channel your using for each one cause if its on for each text that might end up with two triggers that set the same text there’s a chance that while dealing with this you might run into that problem

8

but the channels might be the problem but I don’t know where

9

The channels are all the same and only the trigger on the far left broadcasts to the text the repeater constantly does it every second to update the text which is different time then the trigger.