I have to say, out of all the traps on the forum, this one has to be the most evil, yet easy to set up. The best part is that people will never see it coming, ever. Now, without further ado, let us get into building the trap.
Materials Needed:
- 2 Zones
- 1 Game Overlay
- 1 Speed Modifier
- 1 Respawner
First, take a zone and make it whatever size you want. Now click on it and go to ‘All Options’ Scroll down and add these three settings:
These three settings are the most important part of the entire trap.
Now do the same for the second zone, but this time, leave out the channels so it looks like this:
Now, go into the speed modifier, and set the speed to 0.00. Then have it set the speed when receiving on a channel. Now the settings should look like this:
Once that is done, go into the first zone, and add that channel from the speed modifier so it sends on that channel when someone enters the zone. So, you should have something like this:
Now, go into the Game Overlay, and add these settings:
Now close all of that, and we can begin wiring.
Wire the overlay to the first zone like so:
Now, if you want a delay between the zones activating, place a wire repeater or a trigger with a delay on it between the first and second zones.
Next, wire the respawner to the second zone like so:
Then wire the first zone to the second zone like this:
Now, put the second zone on top of the first zone like this:
And now you have a trap that stops a player in their tracks and respawns them as well.
Alternatively, you could make it do whatever you want like fill with lasers that one-shot people, add a bunch of sentries that blow them away, etc.