📜 How to make the easiest car in gkc W.I.P

Disclaimer ._.

I know there are TONS of guides on this, but I just wanted to make the most simple guide of all.

Materials 🪵

Okay, to start this off, this is all of the materials you need:

Step 1 🛞

so for the first step, we will be doing the wheels.
so all you have to do is just tint it black and you are done!*
Screenshot 2024-05-18 4.16.16 PM

Step 2 ⚙

now you have to tint one of the small metal signs black!
“Oh my, this is so hard!” -nobody♱
Screenshot 2024-05-18 4.26.28 PM

Step 3 🔄

Step 3 (or arranging) will be the hardest step of this whole entire guide.ℊ
First, you will have to arrange the big metal sign and the wheels EXACTLY♛ like this:
Screenshot 2024-05-18 4.34.58 PM
alright, so after you arrange those three things together, get the two smaller signs and arrange them exactly like this:
Screenshot 2024-05-18 4.59.03 PM
And theeeeeennn your done!
(look at the “extras” detail if you want to spice it up)

Extras ✨
car color

so all you have to do is just go to the color slider, and change the color of the metal signs!
Screenshot 2024-05-18 5.08.42 PM

spoilers🍃

all you have to do is just get a blackboard leg, and a barrier.
after you have both of them, arrange them like this, and you have a spoiler!
Screenshot 2024-05-18 5.57.03 PM

Cooler wheels

Suggested by @chub , you can get tinted shields of your choice, and put them inside of the tires so it looks like rims!
Screenshot 2024-05-18 6.11.28 PM

Battering rams 🗡

there are many different ways to do this, but the easiest way is to just use metal signs, and arrange it like this:
Screenshot 2024-05-19 7.16.55 AM

or, you can do it a slightly fancier way, which is like this:

Screenshot 2024-05-19 7.29.29 AM

Exhaust pipe 🔥

so all you have to do is get a metal can, and a text device that has the fire emoji. it should look like this:

Screenshot 2024-05-19 7.40.32 AM

then, if you want to, add dry bushes behind the flame to emphasize it:

Screenshot 2024-05-19 7.44.52 AM

Advanced exhaust pipe 🔥+

So this is a continuation of the other exhaust pipe guide, but basically more advanced. this will be the most mechanical part of the guide, but it would still be easy.
first, you get 4 rows of wire repeaters, like this:
Screenshot 2024-05-19 7.55.17 AM

GIVE SUGGESTIONS IN THE COMMENTS FOR MORE EXTRA ADD ONS!!!

all of the "*" "♱" "♛" "ℊ" symbols

*which isn’t really much of a step, but whatever.
♱I hope nobody said this…
♛First, i wasn’t trying to be rude, and second, i mean like right in the same spot as in the picture.
ℊ and you would wish that the steps in other guides would be this easy.

make suggestions for extra add-ons and I will most likely put them into the guide.

A like would be appreciated, as this took a couple hours to make, thank you!! :slight_smile:

4 Likes

couldn’t you use a shield with a tint to get a better looking wheel?

1 Like

I matter of fact can! (I will add that to the extras section)

1 Like

you could also make the back part another red sign or give the barrier a outline since the rest of the car has a outline

1 Like

okay @chub, I implemented it into the guide.

1 Like

anybody have anymore suggestions?

bump in need of more ideas.

Nice guide! Can I try and make another car?

1 Like

sure, of course you can @I_Like_Props! :slight_smile:

1 Like

Build-pleassian BUMP

1 Like

oh my, the text is so small!

1 Like

bump I guess idk

The sign and wheels could be replaced with barriers unless you want the metal sheen.

1 Like