Colton's Gimkit Round Timer System (00:00) [🟩] Code Involved

[potato123]

A lot of us have already posted answers for this:

How To Make a 1.0 Natural Timer In the Overlay Device (In blocks tab)

Number Property (named “TimerValue”) Set default value to 40, the scope to global, if everyone sees the same time. For counter starting value, 40, the target value 0, update property yes, select TimerValue, decrement when reviving on, create a channel (TimerTick) The repeater task interval, 1.0 seconds, trigger on task start: No, when task occurs, transmit on “Timertick” Start repeater when receiving on, "starttimer, or GameStart. Than for the overlay, the overlay type is text, the text is pro…

How To Make a 1.0 Natural Timer In the Overlay Device (In blocks tab)

You can’t do that inside one block with that method—you have to use a property/counter. Gimkit will run block code as fast as it can, without delay. This makes the only way to add delay inside a block leaving the block to trigger a trigger with delay, which after the delay is over will trigger either the same or maybe a different block. Since you have to leave the block and come back, the block essentially forgets what it’s done since the last time it ran, so your method of just using a number…

How To Make a 1.0 Natural Timer In the Overlay Device (In blocks tab)

You can make a property with the starting value (40 in your case, name it TimeLeft or something like that), and every second decrement it with a trigger loop, and set the block code in the overlay to this: Set text: Create text with: "Next disaster will start in " : Get property: TimeLeft When the trigger is activated, you can make it broadcast on channel TimerChange, and run the block code when receiving on that same channel