Sentries phasing through floor (FIXED)

It’s been a long time since I’ve posted on here but anyway. I have a glitch where I use a repeater to activate a trigger that broadcasts on a channel to activate a sentry. Whenever the sentry gets activated it phases through the floor. I tried placing a barrier under the sentry and many other things but it still won’t work. (BTW, this is on a platformer map and I have a video if it is needed)

If the sentry is close to the ground in the editor, move it up a little
and welcome back!

3 Likes

make the sentry higher up, so then, the sentry will fall onto the barrier instead of falling through

also why are you using a repeater to trigger a trigger :sob:
just use a trigger loop, especially easy in this case.

2 Likes

You placed it too close to the floor, if you place it above the ground it won’t go through.

1 Like

Its been a while since I did this lol and the repeater needs to be activated and deactivated periodically

I placed it decently high above the ground but it still phases through, but I’ll try raising it again

It should fix if you put the sentry a bit higher up from the platform

1 Like

Thanks, Ill try that again

It worked thanks guys

3 Likes

This topic was automatically closed 3 hours after the last reply. New replies are no longer allowed.