I need help w/ lasers

[Josh_Griffen]

I need help figuring out how to make lasers repeat. That’s it.

[Toxic]

Welcome back @Josh_Griffen! So, you just need a laser beam manager.

[Josh_Griffen]

Yes, and thank you! It would be preferable to have pictures, but not necessary.

[Toxic]

Yeah, no pictures rn. But you just have to experiment with the laser groups.

[Josh_Griffen]

How would I go about something like that?

[Toxic]

There’s a setting in the laser. Match the groups of the manager and the laser. And go in the manager, and use the settings!

[Slim]

Use the laser beam manager to manage a lot of lasers if necessary. Use a trigger or wire loop to turn the lasers on & off. In my opinion, I use wires and wire repeaters. Have one end turn off the lasers, while the other turns them on.

Here is a topic with photos of them if you need it.

Wire Repeaters vs Trigger Loops

Trigger loops, they are simple, memory efficient, only require two triggers, AND COST 500 MEMORY PER BLOCK IN EACH TRIGGER?! There’s got to be another way… 1 block of code, The Trigger Loop: [image] A common Trigger Loop would usually require 1 Lifecycle, two wires, two triggers, and two sets of identical block code, one in each trigger. That would be: 1150 Memory! Hint: Don’t you think how the block code was used is inefficient… Now, let’s take a look at a Wire Repeater Loop A W…

Unless I misunderstood your post and you don’t want them to turn on & off.

[NotYoyo]

Guides on laser beam manager:

How To Use A Laser Manager

Ever wanted to make a repeating laser, but you don’t know how to use a trigger or you don’t want to use the… … repeater ? Well I’ve got the solution for you! We’ll need 2 things. Laser Beam Manager x1 Lasers(you can use as much as you want) Step 1 Step 2 poll Hope this helped!

A Guide to the Laser Beam Manager | Difficulty:

Here is how to use the new Laser Beam Manager! [Screenshot 2023-09-10 7.55.18 AM] Summary How to use [lasermanager] poll