Based off of the American Humvee, used by militaries and civilians all over the world
End product (you might want to move the front wheel back when you make yours)
Let’s get started!
Colors (if unspecified, use default)
Olive: R=184, G=202, B=119
Black: R=0, G=0, B=0
Dark Grey: R=46, G=46, B=46
- Materials:
Olive metal sign x7
Olive metal poles x12
Black metal poles x3
Dark Grey barriers x6
Dark grey circular shields x2
Black Circular shields x2
Text boxes containing x2 - Place a metal sign (it’s important that you rotate it upside down, to get a proper windshield angle)
- Put another sign over it
- Add the 3 black metal poles
- Put down the two . these are our windows
- Attach a metal sign
- Attach a second congruent sign, angled. This will be the sloped hood of the car
- Attach a third congruent sign. this will be the back
- Add another angled congruent sign. Feel free to adjust it
- Add another congruent sign
- Make the wheels. Put a grey circular shield inside of a black circular shield. Try to center it as best you can. Make two of these.
- Add the wheels onto the body
- Add a small sign onto the front
- Time to make the wheel wells! For the front one, we will use three dark grey barriers.
- Add the largest barrier
- Add the next largest barrier in a way so that it looks like the front curves over the wheel
- Add the smallest barrier
now time for the rear wheel well
- add 4 metal poles
- add another 4 metal poles, they should make a square on each door
- use the remaining 4 poles to make an X in each square
Done!
This took me a while to make so feel free to heart this guide if you enjoyed it!