Hello there!
Welcome to my guide on how to make a barn! (I possibly will see if I can make horses, but - we will see!)
Materials that you will need is:
Terrain:
Cracked oak
Boardwalk
Devices
Spawn pad
Teleporter
Zone
Props
Haystack (both)
Horseshoe
Anvil
Barrel
Barrel (Water)
Fruit Box (Apples)
Fruit Box (Cabbage)
Ground Hay (Both)
Heavy Hammer (both)
Wooden Bench
Pitchfork
Entrance to the Barn
Alright, first we need to create the entrance to the barn!
So, create a 20 by 9 rectangle with the cracked oak like so (Note: Make sure to have the layer on bottom, and if you want to use the 4 square tool, then do 5 by 2 1/4) Make sure it is on floor mode, not wall!:
Now, use your boardwalk wood and trace only the left and right sides of the cracked oak, like this:
Make sure you aren’t putting the boardwalk on top of the cracked oak, but on the side!
Alright, your doing great so far, before we move on to creating the actual doors/“entrance” part, we need to have a couple of props! So, grab your wooden bench and place them down, facing the center of the little wooden platform we built. Like so:
Before we move on, let’s put a couple of decorations. Grab your horseshoes, and place a couple under some of the benches like this: (You can add more if you want to)
Next, is to the barn part of the entrance!
So, first grab your exposed boardwalk, then from the edges of the porch we built, build up 8 blocks - then stat zig-zaging up 8 times. Then do the same on the other side. Finally, connect them and fill it in with the wall part. Leave a little wide rectangle spot open, then fill it in with floor part of the exposed boardwalk. Then trace the exposed boardwalk with boardwalk on the outside of it.
Like so:
Great job! Almost there, now, grab your zone device and then place it down in the floor part of the barn, like this:
Then grab your teleporter and place it down, then connect it with a wire. Make sure the wire is zone → teleporter, not teleporter → zone. Also, make sure that the wire setting is:
Next grab your teleporter and run with it diagonally ( i recommend running diagonally to the right) and place it down when you are far enough out of sight from the barn.
Congrats, you’re done!! Now go ahead and move on to the next step!
Inside the Barn
Alright, great job so far!
Now, make the barn part of the entrance again, but facing the opposite direction, like so: (Make sure to have the floor part of the entrance there that way it looks like the gims are actually “walking into the barn”
Now go ahead and grab your zone and teleporter again and repeat the steps above (connect the zone to the teleporter, with the wire setting “Player enters zone” - “Teleport player here”.)
Then take your teleporter and run it to the entrance of the barn. (Follow the previous wire if you want to)
Make a 22 by 18 block square/rectangle out of cracked oak like so:
Alright, now it’s time for the stalls!
Alright, so grab your boardwalk and make it a wall, then build at the top right hand corner of the barn, build 10 blocks to the right then down 5 and to the left 10, it should look like this after you repeat it:
Then do the same on the other side!
Like so:
Great job! Now we have to put down some hay and water.
Alright, so grab some ground hay, then change it’s size slightly smaller, and diagonal. like this:
Then start to copy and layer it until you have something like this:
Now, do that to every stall and then you will end up with this:
Now, grab the water barrel, make a bit smaller so it fits like this:
Now put that into everyone until it looks like this:
Great job, now, the moment we have been waiting for- horses!!
So grab your text box, and grab a horse emoji (I used
emoji)And make it big enough, then copy and paste until it is like this:
Noww, repeat!
Awesome job, we are almost finished!
Now is time for the supply room (those two little rooms, are coming in handy!)
Alright grab a haystack and place it down and make it a bit smaller.
Now ( I am sorry) we have to layer a bit!! I know, I know, I am sorry - hang in there.
So! Put your haystack down then copy it. Now go to your layers button:
And then go ahead in and find one of the haystacks, and click the three dots like this:
Then, click the “Move to Above layer” and then you will have this:
Go ahead and highlight both, then copy and paste until you have something like this:
Congrats your done with the hay room! Now onto the water room!
Now grab your sealed barrel, and repeat the same steps from above.
Layer → barrel → move to above layer → stack → copy and paste
And in the end it should look something like this:
Great job! Now all that is left, is to have the end part of the barn!
Now we need to build the back of the barn, so follow the instructions from before:
grab your exposed boardwalk, then from the edges of the porch we built, build up 8 blocks - then stat zig-zaging up 8 times. Then do the same on the other side. Finally, connect them and fill it in with the wall part.
This time leave a bit of a door like this:
And fill it in with grass and water, then also take the boardwalk and trace it like this:
Great job you are done! Go have fun with your new barn
Hope you enjoyed it!
- 1/10
- 2/10
- 3/10
- 4/10
- 5/10
- 6/10
- 7/10
- 8/10
- 9/10
- 10/10
Credits/Thanks to:
@metal_sonic-1 Thank you for helping me!!
unless the barn does something
AMAZING JOB!