How do I make a gimkit lazer maze

[Linkcat5543]

I need help with making a lazer maze were the lazers turn on and off

[Hdangerzones]

You can use a Laser Beam Manager! Gimme a sec and I can send pics

[SuffyPro97]

get a laser beam, name it laser1, active on game start, get a laser beam manager and activate when receiving laser1 auto switch=yes and make the laser beam deal 200 damage to 1 shot people

[Zappy_Zaptos]

Yeah, danger and stuffy said it.

I’m here to remind that a laser’s hit box is NOT the glow part, when you move the laser, a box will show up that will show the actual hotbox, the beacon/flower can damage you too.
Play test your game.

[Hdangerzones]

Activated duration is how long it’s on, and the deactivated duration is how long it’s off.

[SuffyPro97]

if you found a solution, mark the green checkmark on the bottom right of a post so the forums don’t get piled up

[Heliolatry]

Welcome to the forums, @Linkcat5543! Be sure to read the rules and FAQ if you haven’t already, and mark a solution on the reply that helped you most once you’ve found it. It looks like you have some good answers already, but remember to #searchbeforeyoupost because there are a lot of guides on this. ^[1]

---

1. I HATE minimoddingggggg ↩︎

[Scary_Friend]

A Guide to the Laser Beam Manager | Difficulty:

Here is how to use the new Laser Beam Manager! [Screenshot 2023-09-10 7.55.18 AM] Summary How to use [lasermanager] poll

How to make toggleable laser beams Difficulty=

So first you place 4 buttons on the map, wherever you want. Then hook up buttons with channels or wires, I personally use wires, and have 2 deactivate, and 2 activate in a cross formation, so that when you want to deactivate it on 1 side, you can do it on the other side as well. So this is the simple tutorial of how to make toggleable laser beams! Hope that helps! Here is a picture that might help you understand. [Screenshot (4)] a=deactivate b=activate

laser beam guides! >:P