So to begin this is going to be a multi guide with a few different types of hologramsđ
if you have ideas or your own designs Iâm willing to add them.
Hologram 1
Materials needed: 16 steel poles, 1 table, 1 barrier, 3 space containers(ON) iâll use the purple ones, and lastly 1 text device.
Step one
TABLE
yea thats it⊠just get your table out
Step 2
Now this step is a bit difficult so pay attention. First get your metal poles and shrink them all down to HALF the size of a roller. Then take half of the metal poles and shrink them down a little smaller. Lastly arrange then on all 4 corners of the table with the larger ones aligned with the edge and with the smaller ones one the inside of the larger ones. Make sure shadows are off!
Step three
This step is easy, all you need to do is take the barrier, turn off collision, make transparency âAlpha 0.45â and turn the barrier the color of your choice. and center it between the metal poles.
Step 4
Now take your 3 âSpace Containersâ and place them under the table with the out 2 facing upside down so only the top is visible. for clarification dont change the size i know theyâre small in the first pic.
Last step
Now all you need to do is add the âTextâ device, layer it in between the table and the barrier. Then make the Strok Width 2 with a color complimenting you barrier color. Lastly set the font to PT MONO
Thats it for the first Hologram table design! hope you liked it
Hologram two
this one is super easy to do and looks very good
What you will need 1 sentry device, 3 text devices, 1 barrier, and 1 shield.
Step one
Get out your sentry, take the shield and make is very small, then put it in front of the sentry around eye level.
Step 2
Next take the âTextâ device and change font size to 30 and color to correspond with hologram color. Then take the barrier make it round with NO collision and make visibility âAlpha 0.68â and shrink it down to an appropriate size.
Last step
Now all you have to do is take the last 2 âTextâ devices and change font size to 18 and put them under the barrier.
Cool now you have a gim holding a Hologram!
Hologram three
What you will need. 3 barriers, 2 stools, 1 tipped over stool, 1 grey space container(ON), 3 item image, 1 kitchen table (infected), 1 glass cup, 1 ceramic place(broccoli), 1 evil potted plant, and 1 text device.
Step 1
Get out your kitchen table and place the 2 regular stools on each side of the table with one slightly away from it and one slightly under it, then take the tipped over stool and place it at the bottom of the table.
Step two
Now add the evil potted plant, glass cup, and plate of broccoli on the table(it doesnât matter where as long as the hologram isnât blocked.
Step 3
Now all you need to do is take the space container and flip it upside down so the glowing circle is facing up, then you put it in the middle of the table.
Step four
Take the 3 barriers, give them no collision and change their transparency to âAlpha 46â, then shrink 2 of the barriers until the width is the size of the containers blue circle. then take the last barrier and set it at the top. you can change the size to fit whatever you need.
Step 5
now take your text and give it a stok width of 1 so it stands out and place it under the barrier.
Last step(optional)
This step if for any extra things you want to add to your Hologram like emojis and item images. So all you have to do it is simple. just take the extra thing and put it under Hologram.
And thats it for that Hologram!! hope you liked it
Hologram sword on reply #13
